Rockwell Automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual - Manual (Page 22)

22 Rockwell Automation Publication ENET-UM003B-EN-P - August 2013
Chapter 2 Get Started
From this form, you can change the following:
• Password
• Group membership
• Status (enabled or disabled)
You cannot change the user name.
Edit Access Limits
To add or remove access rights for a user to web pages, access Administrative
Settings > User Management > Edit Access Limits.
Default access limits allow members of the Users group to access status and
diagnostic pages and diagnostics, but limit configuration pages to members of the
Administrators group.
IMPORTANT Do not remove default access limits because that makes them available
without authentication.