Rockwell Automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual - Manual (Page 26)

26 Rockwell Automation Publication ENET-UM003B-EN-P - August 2013
Chapter 2 Get Started
1. Specify the back-up file to use.
2. If the back-up file is password protected, enter the password when
prompted.
3. When prompted that the restore overwrites the module, click OK.
When the restore is complete, the module displays a status message.
The module is now configured so that the 888 Factory Reset feature is enabled in
case you need to reset the module to factory settings.