Rockwell Automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual - Manual (Page 42)

42 Rockwell Automation Publication ENET-UM003B-EN-P - September 2013
Chapter 3 Configure a Secure Connection to a Microsoft Windows Client
Open the VPN Connection to
the 1756-EN2TSC Module Once the Windows client and 1756-EN2TSC module are configured, you must
establish the VPN connection.
1. From the Windows notification area, select the network icon.
2. Right-click the EN2TSC VPN Connection and click Connect.
3. Log on with your 1756-EN2TSC user name and password.
It can take 30 seconds or more to connect.
TIP If you want to delete a VPN connection on the Windows client (for example, it
does not work and you want to create a new one).
1. Choose Control Panel > Network and Sharing Center > Change Adapter
Settings.
2. Right-click the connection and choose Delete.