Rockwell Automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual - Manual (Page 25)

Rockwell Automation Publication ENET-UM003B-EN-P - August 2013 25
Get Started Chapter 2
Backup / Restore To back up module configuration, choose Administrative Settings > Backup /
Restore > Backup.
Choose which items to include in the back-up configuration.
You can also enter a password if you need to protect the back-up file.
To restore module configuration, choose Administrative Settings > Backup /
Restore > Restore.
Configuration Item Description
Secure Tunnel Configuration Secure tunnel settings:
• IPsec Configuration
• Mobile Clients
• L2TP Configuration
• L2TP Users
USB Configuration USB port enable/disable status
Security Configuration Security settings:
• 888 Factory Reset
• Remote Factory Reset
• Remote Reset
• Control Flash Update
User Management Configuration User management settings
• Users, passwords, groups
• Access limits
IMPORTANT Restoring a configuration overwrites the current configuration settings in the module, including
user names and passwords. The restore operation can result in changes that do not allow further
web access to the device.
To reduce this risk, the 888 Factory Reset feature is enabled after every restore. If you want to
disable this feature, you must do so manually.