Rockwell Automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual - Manual (Page 44)

44 Rockwell Automation Publication ENET-UM003B-EN-P - September 2013
Chapter 3 Configure a Secure Connection to a Microsoft Windows Client
If you connect to the 1756-EN2TSC module without knowing the L2TP server
IP address, you can find that after the connection is established.
1. Click the network icon in the right, bottom of the Windows taskbar.
2. Choose Status.
3. Click the Details tab.
RSLinx software uses the L2TP server IP address to communicate with the
1756-EN2TSC module inside the secure tunnel.