Rockwell Automation 1756-EN2TSC EtherNet/IP Secure Communication User Manual - Manual (Page 53)

Rockwell Automation Publication ENET-UM003B-EN-P - September 2013 53
Configure a Secure Connection to a VPN Appliance Chapter 5
Configure the Module to
Connect to a VPN Appliance
1. Choose Administrative Settings > Secure Tunnel Configuration > IPsec
Configuration and make sure that Enable IPsec is enabled.
2. To create a new secure association, do the following.
a. Enter the Identifier as a text description of the connection.
b. Choose the VPN Appliance as the Profile.
c. Enter the IP address of the VPN appliance.
d. Enter the pre-shared key and confirm the pre-shared key.
3. Click Add.
In This Field Specify
Identifier Name for the security association, such as VPN_connection
Profile VPN Appliance
Remote IP IP address of the VPN appliance
Pre-shared key Pre-shared key for the connection
Confirm Pre-shared key Same pre-shared key for the connection, as entered above