Rockwell Automation Logix5000 Control Systems: Connect ArmorBlock I/O Modules over Ethernet Quick Start - Manual (Page 15)

Rockwell Automation Publication IASIMP-QS039A-EN-P - July 2013 15
Chapter
2
Use RSLogix 5000 Software to Configure the Module
This chapter shows you how to create an RSLogix 5000 project.
Before You Begin
You must complete these tasks before proceeding:
• The tasks described on page 7 .
• Tasks described in Chapter 1 on page 9 .
What You Need
You need RSLogix 5000 software to complete the tasks in this chapter.
Follow These Steps
Follow these steps to create an RSLogix 5000 project.
Add the EtherNet/IP Bridge
to your RSLogix 5000 project
on page 16
Add Ladder Logic to test the
1732E-OB16M12R Module’s
Lights on page 19
Add and Configure the
ArmorBlock I/O module
on page 18
Start
Download the Project to
Your Logix5000 Controller
on page 23
Test the Lights on the
1732E-OB16M12R Module
on page 24