Download the project to your logix5000 controller – Rockwell Automation Logix5000 Control Systems: Connect ArmorBlock I/O Modules over Ethernet Quick Start User Manual
Page 23
Advertising
Rockwell Automation Publication IASIMP-QS039A-EN-P - July 2013
23
Chapter 2
Download the Project to Your Logix5000 Controller
After you configure your module, download it to the owner-controller. The download transfers the entire program to the
controller, overwriting any existing program.
1. Save your changes.
2. Move the controller’s switch to Program.
3. Click the Controller Status icon and choose Download.
The Download dialog box appears.
4. Click Download.
This completes the download process.
RUN
REM
PROG
Advertising