Rockwell Automation Logix5000 Control Systems: Connect ArmorBlock I/O Modules over Ethernet Quick Start User Manual
Page 16
Advertising
16
Rockwell Automation Publication IASIMP-QS039A-EN-P - July 2013
Chapter 2
Add the Local EtherNet/IP Bridge to the I/O Configuration
1. Open the RSLogix 5000 software.
I/O configuration can be performed offline.
2. To add the EtherNet/IP bridge to your RSLogix 5000 project, right-click 1756 Backplane and choose New Module.
The Select Module dialog box appears.
Advertising