Rockwell Automation Logix5000 Control Systems: Connect ArmorBlock I/O Modules over Ethernet Quick Start - Manual (Page 25)

Rockwell Automation Publication IASIMP-QS039A-EN-P - July 2013 25
Chapter
3
Embedded Web Server Introduction
Rockwell Automation offers enhanced 1732E ArmorBlock for your EtherNet/IP control systems so you can monitor data
remotely via web pages. This chapter shows how you can use the web server.
The module provides access to internal and network diagnostics. This access opens up different, remote access applications
to control systems. Use the ArmorBlock I/O web browser to remotely access module data. Use a web browser to monitor
live module data and access diagnostic information.
Before You Begin
Complete the tasks outlined in previous chapters.
What You Need
You can access the 1732E ArmorBlock I/O web pages only with Internet Explorer 6.0 or higher. To access data view pages,
the browser requires Javascript support. The supported display size is 640 x 480 or greater. Smaller display sizes are
acceptable, but could require extensive scrolling to view the information.
Follow These Steps
Follow these steps to access the web server.
Access the Home Page of
the Module on page 26
Navigating the Web Server
Pages on page 27
Log On to the Web Server
on page 26
Start