Chapter 1, Install your armorblock i/o module, Before you begin – Rockwell Automation Logix5000 Control Systems: Connect ArmorBlock I/O Modules over Ethernet Quick Start User Manual
Page 9: What you need, Follow these steps, Chapter 1 install your armorblock i/o module, Before you begin what you need follow these steps, Chapter
Advertising
Rockwell Automation Publication IASIMP-QS039A-EN-P - July 2013
9
Chapter
1
Install Your ArmorBlock I/O Module
This chapter shows you how to install and wire the 1732E ArmorBlock EtherNet/IP module.
Before You Begin
Perform the prerequisite tasks outlined on
.
What You Need
The only tools required are a flat or Phillips-head screwdriver and a drill.
Follow These Steps
Complete these steps to install your ArmorBlock EtherNet/IP module.
Mount and connect the
1732E I/O module
on page
Configure the model on the
Ethernet network
on page
Wire the auxiliary power
and connect the Ethernet
Start
Advertising