AJA KONA LHi - Manual (Page 11)

KONA v10.5 www.aja.com 11
Cable Connections
KONA offers unsurpassed cable connectivity for a video/audio capture card. Connections
are made via the breakout cable (included with the card) and connectors mounted on
the KONA Card endplate. These connectors, for all three KONA models, are illustrated on
the following pages.
KONA LHi and LHe Plus The Breakout cable used for both KONA LHi and LHe Plus models provides:
• Reference Input (BNC connector)
• Component/Composite/S Video Input (3x BNC)
• Component/Composite/S Video Output (3x BNC)
• AES In (2x XLR)
• AES Out (2x XLR)
• Balanced Audio In (2x XLR)
• Balanced Audio Out (2x XLR)
• RS-422 Machine Control (9-pin)
LHi Endplate: Connectors on the KONA LHi card endplate additionally provide:
• Standard-definition or High-definition SDI input (1 BNC) and output (1 BNC)
• HDMI input and output (2x HDMI mini-connectors)
LHe Plus Endplate: The KONA LHe Plus endplate provides one BNC for SDI/SDI HD input and two
independent SDI/SDI HD output BNC’s.
Figure 1. Breakout Cables for LHe Plus and LHi Models