AJA KONA LHi - Manual (Page 68)

KONA v10.5 www.aja.com 68
Presets Screen
After configuring the AJA Control Panel screens, you can then save all your settings as a
snapshot for later recall—called a preset. In this way, you can organize presets for all your
typical tasks, eliminating time-robbing manual reconfiguration each time. To save a
preset, go to the Presets screen and click “Save Preset.” A dialog will be presented asking
you for a name; enter a meaningful name and click “OK”. Thereafter the preset will be
available under the Control Panel “Presets” list.
Figure 61. Presets Screen
From the Presets screen you can manage your collection of presets easily. To Load or
Delete a stored preset, just select it with your mouse and then click the “Load Preset” or
“Delete” button respectively.
Transferring Saved Presets: If you want to use a saved Preset on another workstation, you can simply copy the file on
removable storage and install it at the new location. The Preset file is always stored at:
• ~/Library/Application Support/AJA/<device name> Presets/ [on Mac]
• c:\Users\<username>\AppData\Local\AJA\Control Panel\<device name> Presets\
[Windows 8]
Reset to Default: When you click the 'Reset to default' button the control panel will delete the User's
preference file and do one of the following:
A. If “Shared” preferences exist, they are reloaded and the device is set to this state.
B. If the “Shared” preferences file does not exist, “factory defaults” are loaded and
the device is set to this state.
For more information on Preset preferences see “Single-user & Network Settings” on
page 44 .