AJA KONA LHi - Manual (Page 69)

KONA v10.5 www.aja.com 69
Firmware Screen
Use the Firmware link to access the firmware update/changeover screen. For the KONA 4/
3G, the Desired pulldown menu allows you to select either:
• Standard Mode—for SD, HD, and 2K formats (allows up/down/cross-conversion)
• 4K Mode—for SD, HD, 2K and QuadHD (3840x2160) and 4K (4096x2160) formats
(disables up/down/cross-conversion)
Click install to erase current firmware and load the desired mode. Note the Installation
message shown below.
Figure 62. Firmware Changeover to 4K
You will be required to power-cycle your computer to finish the changeover.
Figure 63. Changeover Completed