AJA KONA LHi - Manual (Page 58)

KONA v10.5 www.aja.com 58
Analog Out Screen
KONA 4/3G provides a high-quality analog component or composite + Y/C output,
generally used for monitoring. This screen shows the current settings for that analog
output, and allows you to re-configure it when desired (format and black-level).
Figure 50. AJA Control Panel, Analog Out Screen
Analog Out Screen
Settings
Analog Output: Select Primary or Secondary (any conversion applied) for the analog output; if a
conversion is applied, you’ll see the conversion icon appear on the block diagram.
Formats: Next, select the video format from the Format pulldown.
• Component (SMPTE/EBU N10)
• Component (Beta)
• Component (RGB)
A Note About YPbPr: Component Video, or YPbPr, has been given several names over time. YUV, Y/R-Y/B-Y, and
YCbCr, are just some examples. Although these various formats have some differences in
levels, they are all basically the same. KONA uses the modern YPbPr terminology exclusively.
KONA supports three different types of YPbPr:
• SMPTE/EBU N10
• Betacam (NTSC)
• Betacam (NTSC Japan).
These three formats differ in level only and are configured here.