AJA KONA LHi - Manual (Page 31)

KONA v10.5 www.aja.com 31
Installing KONA Software
First ensure that your capture/editing application is installed as detailed in its user
documentation. You cannot use KONA with a third-party application until the application
has been installed and run at least once on your workstation. Next, install the KONA
driver package. After installing KONA drivers you will install your selected AJA third-party
plugins integrating KONA functionality into your capture/editing application.
System software updates may occasionally become available to AJA KONA owners on
our website (see
“AJA Software Downloads” on page 17 for website information).
We recommend checking occasionally for both software updates and additional product
information.
NOTE: If your computer has previously had another video capture or multimedia card installed,
ensure you remove the card and uninstall any related software before installing KONA card.
This will prevent any hardware or software conflicts. KONA will operate properly on a
computer that also has an AJA Io product and its associated drivers installed.
Mac Software
Installation
After securing the most recent KONA driver package, read the details and requirements
in the release notes to ensure compatibility with your system configuration. Minimum
system requirements for the host were discussed in
“System Requirements” on page 6 .
NOTE: If you have trouble installing Io XT or Io 4K software, turn off any virus protection and security
software that you may have installed on your computer and try again.
Mountain Lion OS and
Gatekeeper
With the addition of Gatekeeper functionality in Mas OS Mountain Lion, you should go to
System Preferences>Security & Privacy and choose to allow Mac App Store and identified
developers.
Figure 18. Mac Security & Privacy Gatekeeper Setting