AJA KONA LHi - Manual (Page 89)

KONA v10.5 www.aja.com 89
• +/- .2 dB to 5.5 MHz Y Frequency Response
• +/- .2 dB to 2.5 MHz C Frequency Response
• .5% 2T pulse response
• <1 ns Y/C delay inequity
Audio Input Digital • 8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
• 2-channel, 24-bit AES/EBU audio, 48kHz or 96 KHz sample rate, Synchronous or Non-
synchronous, Internal sample rate conversion (via 1 x XLR on breakout cable or
optional KL-Box)
Audio Input Analog • 2-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (via 2 x XLR on
breakout cable or optional KL-Box)
• +24dbu Full Scale Digital
• +/- 0.2db 20 to 20kHz Frequency Response
Audio Output Digital • 8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
• 2-channel, 24-bit AES/EBU audio, 48kHz or 96 KHz sample rate, Synchronous or Non-
synchronous, Internal sample rate conversion (via 1 x XLR on breakout cable or
optional KL-Box)
Audio Output Analog • 2-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (via 2 x XLR on
breakout cable or optional KL-Box)
• +24dbu Full Scale Digital (0dbFS)
• +/- 0.2db 20 to 20kHz Frequency Response
• 2-channel unbalanced output (via 2 x RCA jacks on optional KL-Box)
Down-Conversion • Hardware 10-bit
• Anamorphic: full-screen
• Letterbox: image is reduced with black top and bottom added to image area with the
aspect ratio preserved
• Crop: image is cropped to fit new screen size
Reference Input • Analog Color Black (1V) or Composite Sync (2 or 4V)
• Looping
• 75 ohm on optional KL-Box, terminated on supplied breakout cable
Hardware Acceleration
Provided
• DVCProHD hardware acceleration
• HDV hardware acceleration
Physical • Interface: 8x PCIe slot
Machine Control • RS-422, Sony 9-pin protocol (via DB-25 breakout cable or optional KLHi-Box)
• 9-pin D-connector pinout is as follows:
1 - GND
2 - RX-
3 - TX+
4 - GND
5 - No Connection
6 - GND
7 - RX+
8 - TX-
9 - GND
Shell - GND