AJA KONA LHi - Manual (Page 49)

KONA v10.5 www.aja.com 49
Control Panel Operation in Standard Mode
NOTE: This section discusses KONA standard mode Control Panel operation. The KONA 4 and 3G
cards also offer 4K Mode which will be discussed later (see
“Using KONA 4 and 3G in 4K Mode”
on page 71 ).
Control Screen
The KONA card can be controlled by various software applications running on a host
computer. The Control screen is where you select how the KONA directs video and is
used by application software. This screen also provides control for configuring output
timing with regard to external reference video and horizontal/vertical delay.
At the top of the Control Screen it will show the currently selected AJA device if more
than one is available in your system.
Figure 43. AJA Control Panel, Control Screen
Control Screen Settings
Default Output This is where you select what the KONA card will output as a default when no application
has control of the board, such as when the Mac Finder or Windows Navigation Pane is
active. Since KONA can be controlled by software applications as well as its own control
panel, the output can change dynamically. When you select many video applications,
they will take control of the KONA inputs and outputs. However, when an application
that doesn’t take control is active, these settings determine what KONA will output.