AJA KONA LHi - Manual (Page 36)

KONA v10.5 www.aja.com 36
13. Click the Restart button to complete the installation procedure. The system will
perform a software restart and be ready for use.
NOTE: You may be required to update the KONA card’s firmware if installing a new version.
See
“Updating KONA Firmware” on page 42 .
Windows Software
Installation
If your PC has previously had another video capture or multimedia card installed, remove
the card and uninstall any related software before installing KONA. Also, always uninstall
existing KONA software before installing a new version. This will prevent hardware/
software conflicts.
The installation procedure is described below. You cannot use KONA with third-party
applications until the AJA KONA software has been installed on the host workstation.
If you add KONA supported applications at a later date and have not previously installed
the appropriate plugins, you must run the install program again selecting the
appropriate application support software to be installed.
Software Installation
Procedure
Locate the AJA KONA Software download or CD ROM packaged with your system and
follow the procedure below to install the required software on the host system. The
KONA for PC software is intended for Windows 64-bit workstations.
The KONA for PC 10.0 Installation Software is divided into separate installer packages
containing:
• Retail Drivers and Control Panel applications
• Plugins for the various third-party applications supported.
The AJA Drivers Software package must be installed first. Next, install the plugin package
for your desired third-party Application Software.
Figure 26. KONA for PC Drivers Installer Package
NOTE: If you have trouble installing KONA software, turn off any virus protection and security
software that you may have installed on your computer and try again.
This section describes the AJA Retail Software package installation. The subsequent
installations are essentially the same but do not require restart of the computer. Refer to
your specific plugin package Installation Guide.
Double-click on the download package.
Install Wizard The KONA installation program will launch and extract the necessary KONA drivers for
installation on your hard drive.