AJA KONA LHi - Manual (Page 13)

KONA v10.5 www.aja.com 13
Using Breakout Boxes
The KONA product line offers two optional 19” 1RU rack-mountable breakout boxes that
attach to the KONA card via cables that connect to the back of the Box. These cables are
supplied with the Box. The breakout boxes offer the same inputs and outputs as the
standard breakout cables and more. Breakout boxes can be easily rackmounted or placed
on top of a broadcast monitor or editing desk.
KONA KL-Box for
LHe Plus
The KONA KL-Box is connected via one 60-pin to 60-pin, and one 3-BNC to 3-BNC cable.
When you purchase the KL-Box, you get two-channel unbalanced audio output (2 RCA
Jacks) not available with the standard cable. When ordering a KL-Box, specify the KONA
card model you’ll be using the KL box with to ensure you get the proper cable set.
Figure 3. KL-Box Model Breakout Box
KONA KLHi-Box
The KONA KLHi-Box offers the same connections as the KL-Box except a single connector
is provided for the following: SDI input, SDI output, HDMI v1.3a input, and HDMI v1.3a
output.
NOTE: The HDMI connectors on the breakout box are full-size, not mini as on the LHi endplate
Figure 4. KLHi-Box Model Breakout Box.
Reference
(loop)
Output Channels 1 & 2 Component
Video Out
Digital
Out
RS422
Machine
Control
External
Reference
(loop)
Analog Audio
Output
Balanced Audio In
Channels 1 & 2
Balanced Audio Out
Channels 1 & 2
Composite/
Component
Video In
Composite/
Component
Video Out
AES/EBU Audio
In and Out In
Serial
Digital
Serial
Digital
Out
RS422
Machine
Control
External
Ref. or LTC
(loop)
Analog
Audio
Output
Balanced Audio In
Channels 1 & 2
Balanced Audio Out
Channels 1 & 2
Composite/
Component
Video In
Composite/
Component
Video Out
AES/EBU Audio
In and Out
SDI
In
SDI
Out
HDMI v1.3a
Out
HDMI v1.3a
In