AJA KONA LHi - Manual (Page 30)

KONA v10.5 www.aja.com 30
3. Connect a 9-pin DE9 machine control cable between your VTR’s RS422 control port
and the breakout cable’s RS-422 machine control connector.
4. Connect two SDI cables between KONA LHi (BNCs are on the card endplate) and your
digital VTR (Digital Betacam etc.): one from KONA LHi SDI In to the VTR SDI Out, and
one from KONA LHi SDI Out to the VTR SDI In. The KONA LHi SDI connections have
embedded audio so the VTR must be configured accordingly.
5. If you have an AES/EBU-ready audio monitoring system, then connect the two
channels of AES/EBU output from KONA LHi’s XLR connectors (channels 1 and 2) to
the monitoring system AES/EBU inputs. If you instead have an analog audio
monitoring system, you can use either the XLR balanced audio connectors or the two
RCA-style unbalanced stereo output jacks on the Optional KLHi-Box for output.
Figure 17. Typical KONA LHi System Connections—Shown with Optional KLHi-Box