Baumfolder Flexifold: Pile Folder (in 2004) - Manual (Page 37)

PAGE 37 TP10496
9. Press the Enter Key, 7, and the operator panel will return to the
screen.
10. Use the Up Arrow Key, 14, until the message
is displayed.
11. Press Enter Key, 7, and the operator panel display will return to the main count screen.
18.0.3 PILE FEEDER OUTPUT TESTS
This group of tests will help to verify the operation of the output circuits contained in the Output
Circuit Test table. Exiting this Diagnostic program can be done at any time by scrolling to the EXIT
screen and pressing the Enter Key, 7.
1. Turn the main Pile Feeder Power Switch on.
2. Press the Pile Feeder Start Key, 2.
3. Press the Diagnostic Key, 5. The message
will be displayed.