Baumfolder Flexifold: Pile Folder (in 2004) - Manual (Page 38)

TP10496 PAGE 38
4. Press the Enter Key, 7, to enter the diagnostic tests or press the Reset Key, 5, to exit. The
message
5. Press the Up Arrow Key, 14, until the message
is displayed.
6. Press the Enter Key, 7, and the message
will be displayed.
7. Using the Up/Down Arrow Keys, 14/13, select the output test of interest. In the table on the
next page, there is a list of each output test available in this diagnostic program, along with remarks on
how the chosen output should function normally.
8. To exit the sensor tests, use the Up Arrow Key, 14, until the message
is displayed.
9. Press the Enter Key, 7, and the operator panel will return to the
screen.
10. Use the Up Arrow Key, 14, until the message
is displayed.
11. Press Enter Key, 7, and the operator panel display will return to the main count screen.