Baumfolder Flexifold: Pile Folder (in 2004) - Manual (Page 39)

PAGE 39 TP10496
18.0.4 PILE FEEDER INDICATOR TESTS
These tests will test the operation of the each indicator on the operator panel. Exiting this
Diagnostic program can be done at any time by scrolling to the EXIT screen and pressing the Enter Key,
7.
1. Turn the main Pile Feeder Power Switch on.
2. Press the Pile Feeder Start Key, 2.
3. Press the Diagnostic Key, 5. The message
4. Press the Enter Key, 7, to enter the diagnostic tests or press the Reset Key, 5, to exit. The
message
5. Press the Up Arrow Key, 14, until the message
is displayed.
6. Press the Enter Key, 7, to enter the Indicator Test, and the message
will be displayed.