Metrohm 844 UV/VIS Compact IC - Manual (Page 79)

3.3 Settings
844 UV/VIS Compact IC / Gebrauchsanweisung 8.844.1051
67
The Program tab contains the two following subtabs:
Program Main time program with all program steps.
Remote configuration Possibility for creation of user-defined remote
commands.
Program
On the Program subtab, program steps including time, program
instruction and parameter can be entered.
Time (1 st column) Time at which program instruction is applied.
Entry range: 0.0 ... 999.9 min
If no time is entered, the program instruction is
applied together with the last instruction with
time entry.
Command (2 nd column) Program instruction (see List of program
instructions).
In addition to these predefined instructions,
user-defined remote commands can be
entered if activated on the
Remote configuration
tab.
Parameter (3 rd column) Parameter for program instruction (see List of
program instructions).
ENABLED Enable program start (a disabled program is
not started).
<Add> Add new program instruction.
<Delete> Delete selected program instruction.
<Verify> Test the time program (error messages are
displayed if program is wrong).