Metrohm 899 Coulometer - Manual (Page 28)

3.4 Connecting sensors
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
18 ￭￭￭￭￭￭￭￭
899 Coulometer
2
6.2104.120
Figure 10 Screwing the electrode cable to the general electrode
Connecting the electrode cable to the coulometer
1 Plug the electrode plug into the Gen. socket of the Coulometer.
Figure 11 Connecting a generator electrode
Note
The electrode cable is protected against accidental disconnection
of the cable by means of a pull-out protection. If you wish to pull
out the plug again, you will first need to pull back the outer plug
sleeve.
3.4.2 Connecting an indicator electrode
Screwing on the electrode cable to the indicator electrode
1 Unscrew the cover of the indicator electrode.