Banner SureCross DX80 Wireless Networks - Manual (Page 37)

On the Gateway use the DERR menu to clear, disable, or ignore error messages generated by devices within the
network. The Node number that generated the error and the error code (EC) display onscreen. Single-click button 1 to
advance through the menu of CLEAR (clear this particular instance of the error from the system), DISABL (disable this
particular error from appearing from this specific Node), and IGNORE (ignore this error but do not remove it from the
system). After the error messages for a Node are cleared, disabled, or ignored, errors for any additional Nodes display on
the Gateway’s LCD.
On the Node use the DERR menu to view and ignore error messages for that Node.
5.2 Web-based Configuration
The SureCross wireless systems are configured using an Ethernet network connection and a common Web page browser.
An Ethernet connection can be established from a GatewayPro or from a DX83 Ethernet Bridge serially connected to the
Gateway.
The Ethernet Bridge and GatewayPro each ship with an Ethernet crossover cable. One end of the cable is a RJ45 connector
and the other end is an industrial Ethernet connector. This cable is designed to be connected directly to a computer.
5.2 Example Layout #1
When connecting a Gateway to a host system, the wireless network must be configured using the User Configuration Tool
(UCT). When you are not using a GatewayPro or Ethernet Bridge, you cannot configure the wireless network using the Web
Configurator.
Host
1
2
3
1. Power connection
2. Splitter cable and Modbus RTU communication
3. Gateway
5.2 Example Layout #2
This system uses a GatewayPro connected directly to a host system using an Ethernet crossover cable. This system can be
configured using the web pages.
SureCross Wireless I/O Networks
37