Banner VALU-BEAM Series - Manual (Page 9)

VALU-BEAM –
915 Series
page 9
Banner Engineering Corp. • Minneapolis, U.S.A.
Website: http://www.baneng.com • Tel: 888.373.6767
Replacement Lens Assemblies
VALU-BEAM lens assemblies are field-replaceable. In addition, some lenses may be used to convert from one sensing mode to another, or to
change the sensing range of a particular sensor. The possible conversions are listed in the table below.
Change LV to LVAG
Change LV to CV
Change D or F to DSR, EF to ESR and RF to RSR
Change D to F and DSR to F
–
Change LVAG to LV, CV to LV, DSR to D & F to D
Flat Lexan
® dust cover
Model Description
Possible Sensing Mode or
Range Changes
UC-900AG
UC-900C
UC-900DSR
UC-900F
UC-900FP
UC-900L
UC-900J Replacement lens for LVAG
Replacement lens for C and CV
Replacement lens for DSR, ESR & RSR
Replacement lens for F
Replacement lens for FP
Replacement lens for E, R, LV & D
Attach to VALU-BEAMs E, R, ESR,
RSR, LV and D
Lexan ® is a registered trademark of General Electric Co.
60°C (140°F)
60°C (140°F)
60°C (140°F)
60°C (140°F)
60°C (140°F)
60°C (140°F)
60°C (140°F)
65°C (150°F)
175°C (350°F) Package of 10
Package of 5
Package of 2
Single Sheet
2.5 m (100") length
2.5 m (100") length
2.5 m (100") length
2.5 m (100") length
2.5 m (100") length BRT-THG-3X3-10
BRT-THG-4X4-5
BRT-THG-8.5X11-2
BRT-THG-18X36
BRT-THG-1-100
BRT-THG-2-100
BRT-THG-3-100
BRT-T-100*
BRT-THT-100* 0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.2
0.07
Unit
75 x 75 mm (3" x 3")
100 x 100 mm (4" x 4")
216 x 280 mm (8.5" x 11")
457 x 914 mm (18" x 36")
25 mm (1") wide
50 mm (2") wide
75 mm (3") wide
25 mm (1") wide
25 mm (1") wide
Model
Reflectivity
Factor Size
Maximum
Temperature
Retroreflective Tape
* Targets are not recommended for polarized retroreflective sensors