Banner T-GAGE M18T Series Temperature Sensors - Manual (Page 7)

Dimensions
Cabled Models QD Models
26.5 mm
(1.04")
See table
below**
See table
below*
27 mm
(1.06")
18.0 mm
(0.71")
10.6 mm
(0.42")
6.0 mm
(0.24")
**Overall Length
Model M18T..8Q 91.3 mm (3.59")
Model M18T..6EQ 91.8 mm (3.61")
Model M18T..14Q 96.6 mm (3.80") *Overall Length
Model M18T..8 81.2 mm (3.20")
Model M18T..6E 81.7 mm (3.22")
Model M18T..14 86.5 mm (3.41")
M18 X 1
Hookups
Load
Load
bk
gy
bn
bu
wh
+10 - 30V dc
shield
Remote
Teach
Cable and QD hookups are functionally identical.
NOTE: It is recommended that the shield wire be connected to earth ground or dc common. Shielded cord-
sets are recommended for all QD models.
M18T T-Gage Sensor
P/N 120632 Rev. A www.bannerengineering.com - tel: 763-544-3164 7