Banner MINI-SCREEN Lens Shields User Manual
Page 2
Remove dirt and/or oil from the front face of the shield using a mild detergent or
window cleaner and a soft cloth. Avoid industrial cleaning agents or cleaning agents
containing alcohol, as they may damage the polycarbonate shield material.
Shield Maintenance
Peel the lens shield away from the sensor starting at the top or bottom end, and con-
tinuing to the opposite end of the sensor. All or most of the gasket will remain
attached to the sensor. Peel the gasket material away from the sensor. Clean the
sensor and install the new lens shield as described in the above instructions.
Shield Replacement
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 Telephone: (612) 544-3164 FAX (applications) (612) 544-3573
WARRANTY: Banner Engineering Corporation warrants it products to be free from defects for one year. Banner
Engineering Corporation will repair or replace, free of charge, any product of its manufacture found to be defective at the time
it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper
application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.