Banner USA Series Protective Mounting Stands - Manual

USA Series Protective Mounting Stands
For Selected Light Screen Sensors
Printed in USA P/N 57119
USA Series Description
Banner USA Series Protective Mounting Stands are for use with light screen emitters
and receivers. They are designed to deflect physical impact and flying material, such
as weld spatter, preventing damage to the sensor or its lens.
USA Series Features
• Available in two sizes to fit sensors up to 56" long
• Easy to mount to wall, post, machine frame or MSA Series base
• Protects one side and front window of light screen sensor, or combine two in a
U-shaped configuration to protect entire sensor (see Figure 2)
• For use with MICRO-SCREEN ® , MINI-SCREEN ® , or MINI-ARRAY ™ emitters and
receivers (MINI-SCREEN and MINI-ARRAY applications require the use of MSMB-4
mounting brackets)
USA Series Models
USA Series Specifications
Model Number
Length
“L”
For MICRO-SCREEN
Sensors
For MINI-SCREEN or
MINI-ARRAY Sensors*
USA-PMS-40 40" 4" to 36" 4" to 36"
USA-PMS-62 62" 4" to 56" 4" to 48"
*Requires one MSMB-4 (p/n 48954) mounting bracket pair for each sensor.
Construction 11 ga. AWG cold-rolled steel
Finish Zinc-plated, chromate dip, black
Weight
40": 6.15 lb. (without base)
62": 9.70 lb. (without base)
Shown with
optional MSA-SB-1
Floor-Mounting Base
(sold separately)
WARNING . . . Maintain Required Separation Distance
The Defined area (light screen) produced by the MICRO-SCREEN ® or
MINI-SCREEN ® sensors must be placed at a minimum safe distance
from the dangerous motion of the machine being guarded. This
necessary minimum distance is called the separation distance, and is discussed in
Section 3 of MICRO-SCREEN, MINI-SCREEN and MULTI-SCREEN instruction
manuals. Failure to calculate this distance correctly and to maintain minimum
separation distance can result in serious injury or death.
!