Remote functions, Pak 200i – Tweco PAK 200i User Manual
Page 82
Advertising
PAK 200i
A-�
APPENDIX
Manual 0-5335
Remote Functions
Remote Enable / Disable ( input)
— Requires closed connection rated for 10 ma. @ �0VDC for unit to operate.
Remote Start/Stop options
Factory installed jumper between TB1-1&2 must be removing when connecting user supplied Enable/Disable circuit.
4 Start/Stop (input)—Switch (momentary or sustained) minimum rating 10ma. @ 20 VDC
Start / Stop circuit configuration. Momentary Start / Stop (Latched) is only available at TB1.
MOMENTARY START / STOP
START / STOP
TB1-6
TB1-5
TB1-4
SUSTAINED START / STOP
START
STOP
TB1-5
TB1-6
Advertising