06 hand torch consumables, 07 hand torch spare parts kits – Tweco SL100 User Manual
Page 48
PARTS LISTS
6-8
Manual 0-2962
6.06 Hand Torch Consumables
The illustration shows all consumable parts for the SL60
and SL100 hand torches. Refer to the Appendix pages
covering the power supply being used to ensure proper
selection for the application.
Various front - end torch parts are available for different
applications.
Use the single - piece shield cup for general purpose cut-
ting operations with the torch tip in contact with the work
(up to 40 amps). This is the preferred method of cutting
sheet metal up to 3/16" or 4.8 mm thick.
Also use the single - piece Shield Cup for 'standoff' cut-
ting (with the torch tip 1/8" to 1/4" from the workpiece).
This is the preferred method for cutting metal thicker than
3/16" / 4.8 mm and at current levels above 40 amps. This
provides maximum visibility and accessibility.
The Standoff Guide fits Shield Cup No. 9-8218 and enables
the user to maintain a consistent standoff height for most
applications.
Use the Shield Cup Body with the Deflector Shield Cap for
extended parts life and improved resistance to reflected
heat. This combination provides cutting results similar to
the single-piece Shield Cup, as well as easy change-over
to gouging or drag shield cutting.
Use the Shield Cup Body with the Drag Shield Cap for a
consistent standoff distance with the drag shield in contact
with the workpiece. This is a simple and operator-friendly
method of cutting between 50 and 100 amps.
Use the Shield Cup Body with the Gouging Shield Cap
for excellent gouging performance and enhanced torch
parts life.
The electrode and starter cartridge are the same for all
operations.
6.07 Hand Torch Spare Parts Kits
Item
Catalog No.
40-Amp Kit,
Cat No. 5-0050
60-Amp Kit,
Cat No. 5-0075
80-Amp Kit,
Cat No. 5-0110
100-Amp Kit,
Cat No. 5-0170
Electrode
9-8215
3
3
3
3
40A Drag Tip
9-8207
5
2
2
2
40A Standoff Tip
9-8208
2
5
0
1
2
8
-
9
p
i
T
f
f
o
d
n
a
t
S
A
0
6
5
1
1
2
8
-
9
p
i
T
f
f
o
d
n
a
t
S
A
0
8
5
2
1
2
8
-
9
p
i
T
f
f
o
d
n
a
t
S
A
0
0
1
1
1
1
7
3
2
8
-
9
y
d
o
B
p
u
C
d
l
e
i
h
S
1
5
3
2
8
-
9
A
0
6
-
0
5
,
p
a
C
d
l
e
i
h
S
g
a
r
D
1
1
6
3
2
8
-
9
A
0
0
1
-
0
7
,
p
a
C
d
l
e
i
h
S
g
a
r
D
Large O-Ring
8-3487
1
1
1
1
Small O-Ring
8-3486
1
1
1
1
Standoff Guide
9-8251
1
1
1
1
1
8
2
8
-
9
e
d
i
u
G
f
f
o
d
n
a
t
S
Hand Torch Spare Parts Kit Contents