Viking Pump TSM275: AL-05 - Manual (Page 18)

Page 18
5.2 Single Mechanical Seal.
Item Number Description Material Quantity
4.01.03 Static Face Silicon Carbide 2
4.01.04 O-ring EPDM / VITON 4
4.01.05 Housing 316 S11 St. Steel 2
4.01.06 Wave Spring St. Steel 2
4.01.07 * Slinger O-ring EPDM / VITON 2
4.01.08 M8 Dog Point Grub Screw 316 St. Steel 2
4.01.09 * 1/8 BSPT Hex Plug 316 St. Steel 2
*
- Not Shown
• Install Slinger O-Ring (4.01.07) onto the shaft ensuring the o-ring is all the way up the
shaft and against the pump body bore face. This is also visible through the slots in
the sides of the pump body.
• Install external o-rings (4.01.04).
• Install the seal housing into the pump assembly. Aligning the flush holes with the
tapings in the pump body.