Viking Pump TSM275: AL-05 - Manual (Page 20)

Page 20
5.3 Single Flushed Mechanical Seal.
Item Number Description Material Quantity
4.01.03 Static Face Silicon Carbide 2
4.01.04 O-ring EPDM VITON 4
4.01.05 Housing 316 S11 St. Steel 2
4.01.06 Wave Spring St. Steel 2
4.01.07* Slinger O-ring EPDM / VITON 2
4.01.10 O-ring EPDM / VITON 2
4.01.11 Flush / Locking Adapter 316 St. Steel 2
4.01.12 * Flush / Locking Adapter O-Ring EPDM / VITON 2
*
- Not Shown
• Install Slinger O-Ring (4.01.07) onto the shaft ensuring the o-ring is all the way up the
shaft and against the pump body bore face. This is also visible through the slots in
the sides of the pump body.
• Install external o-rings (4.01.04) and internal o-ring (4.01.10) to the Seal housing
(4.01.05)
• Install the seal housing into the pump assembly. Aligning the flush holes with the
tappings in the pump body.