Viking Pump TSM275: AL-05 User Manual
Page 19
Advertising
Page 19
•
Install the locking grub screw (4.01.08) such that the point of the grub screw is
locking the seal housing in position.
•
Undo the locking grub screw (4.01.08) by one complete turn. This is to ensure no
side loading is placed on the housing or seal face resulting in seal leakage.
•
Install the primary o-ring (4.01.04) onto the Static Seal (4.01.03).
•
Install the static seal face (4.01.03) aligning the slots in the seal face with the anti-
rotation pins in the seal housing.
•
Install the rotor and rotary seal face assembly.
WARNING
Advertising