Technical service manual, Warranty, Single channel controller – Viking Pump TSM630.4: K-QS 124E Controller User Manual

Page 10

Advertising
background image

SECTION TSM 630.4
PAGE

10 OF 10

ISSUE

D

VIKING PUMP, INC.

A Unit of IDEX Corporation

Cedar Falls, IA 50613 USA

© 3/2013 Viking Pump Inc.

All rights reserved

TECHNICAL SERVICE MANUAL

WARRANTY

Viking warrants all products manufactured by it to be

free from defects in workmanship or material for a

period of one (1) year from date of startup, provided

that in no event shall this warranty extend more than

eighteen (18) months from the date of shipment from

Viking. The warranty period for Universal Seal series

pumps ONLY (Universal Seal models listed below) is

three (3) years from date of startup, provided that in

no event shall this warranty extend more than forty-two

(42) months from the date of shipment from Viking.
UNDER NO CIRCUMSTANCES SHALL VIKING BE

LIABLE UNDER THIS WARRANTY OR OTHERWISE

FOR SPECIAL, INCIDENTAL, INDIRECT,

CONSEQUENTIAL OR PUNITIVE DAMAGES OF ANY

KIND, INCLUDING, BUT NOT LIMITED TO, LOST

OR UNREALIZED SALES, REVENUES, PROFITS,

INCOME, COST SAVINGS OR BUSINESS, LOST OR

UNREALIZED CONTRACTS, LOSS OF GOODWILL,

DAMAGE TO REPUTATION, LOSS OF PROPERTY,

LOSS OF INFORMATION OR DATA, LOSS OF

PRODUCTION, DOWNTIME, OR INCREASED

COSTS, IN CONNECTION WITH ANY PRODUCT,

EVEN IF VIKING HAS BEEN ADVISED OR PLACED

ON NOTICE OF THE POSSIBILITY OF SUCH

DAMAGES AND NOTWITHSTANDING THE FAILURE

OF ANY ESSENTIAL PURPOSE OF ANY PRODUCT.
THIS WARRANTY IS AND SHALL BE VIKING’S SOLE

AND EXCLUSIVE WARRANTY AND SHALL BE IN

LIEU OF ALL OTHER WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO, ALL WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND

NON-INFRINGEMENT ALL OF WHICH OTHER

WARRANTIES ARE EXPRESSLY EXCLUDED.
See complete warranty at www.vikingpump.com.

SINGLE CHANNEL CONTROLLER

EU (EUROPEAN UNION)

SPECIFICATIONS

DISMANTLING AND DISPOSAL

The controller meets the essential requirements of the

following European Union Directives by using the relevant

standards shown below to indicate compliance

The enclosure is made of Polycarbonate material.

Use proper recycling techniques.

Do not throw in trash. When disposing, the parts must be

handled and recycled in accordance with local regulations.

Per 2002/96/EC W.E.E.E. Directive, please recycle properly.
The controller contains a lithium battery that must be

recycled properly

2004/108/EC Electromagnetic Compatibility

Directive

EN 61326-1

2006

Electrical equipment for

measurement, control

and laboratory use- EMC

requirements (Industrial

Immunity, Class b

Emissions).

EN 61000-4-2

1996 +A1,A2

Electrostatic Discharge
Immunity

EN 61000-4-3

2006

Radiated Field Immunity
10V/M 80-1000 MHz, 3 V/M
1.4-2.7 GHz

EN 61000-4-4

2004

Electrical Fast-Transient/
Burst Immunity

EN 61000-4-5

2006

Surge Immunity

EN 61000-4-6

1996 +A1,A2,A3 Conducted Immunity

EN 61000-4-11 2004

Voltage Dips, Short
Interruptions and Voltage
Variations Immunity

EN 61000-3-2

2006

Harmonic Current Emissions

EN 61000-3-3

2005

Voltage Fluctuations and
Flicker

SEMI F47

2000

Specification for
Semiconductor Sag
Immunity Figure R1-1

2006/95/EC Low-Voltage Directive

EN 61010-1

2001

Safety Requirements of

electrical equipment for

measurement, control and

laboratory use. Part 1:

General requirements.

Compliant with 2002/95/EC RoHS Directive

Advertising