SARGENT 10 Line Cylindrical Lock - Manual (Page 4)

Install 10U94/10U94-2
Remove 10G13
A7133J
© SARGENT Manufacturing Company
4
• Remove inside (non-rigid) lever with standard
push pin
• Insert long push pin into inside lockbody tube
and push to release spring loaded lever catch
plug assembly for the outside lever
• Remove the outside lever with lever catch plug
assembly attached
• Power Required: 24Volt DC, .25 amps,
wiring information provided
• Wires must be protected from
abrasion
• Important- See correct door template
4409 provided or on the
website at [email protected].
Function Description:
10G70 Fail Secure
Power OFF unlocks outside lever
Power ON locks outside lever
Key retracts latch at all times
10G71 Fail Secure
Power ON unlocks outside lever
Power OFF locks outside lever
Key retracts latch at all times
2-FRONT
Screw
1/4 x 20
Cup
washer
Screws (2) #6 x 3/4"
Scalp to be removed
with flat bladed screwdriver
2 holes to align with
2 tabs on rose
Rose
Install 10U93 Install 10G70 & 10G71
Screw
1/4 x 20
Cup
washer
Backset
1-1/8"
1/8" x 3/16" deep
Hole
5/16"
dia.
Screws (2) #6 x 3/4"
Scalp to be removed
with flat bladed screwdriver
Screws (2) 10-32 x 1-1/4"
Screws (2)
#8-32 x 3/4"
Tab
2 holes to align with
2 tabs on rose
Rose