SARGENT RDL Tubular Lock with Simpli Roseless Trim - Manual (Page 2)

STEP 7
Rotate and verify the set screw hole in both mounting plate assemblies
face the hinge and push both spindles into the latch assembly hubs.
Front Edge
of Door
Set screw hole on
lever bushing must
face the hinge
Mounting Plate
Assembly
spindle
STEP 8
Position the outside front onto the latch
assembly and secure with provided screws
X
STEP 9
Assemble the inside and outside collars by threading to the mounting plate with
provided tool
• Orient the bushing to collar as shown (65 function only)
STEP 10
Assemble the inside and outside
levers with provided set screw
(not shown)
• Test assembly
• Install Strike
Note: Collars must lie flush against the door
Edge of Door
Dummy Trim Assembly Shown
Use assembly steps 2, 6, 9 & 10 for
dummy trim installation
Template for RDLU93 & RDLU94
2-3/4" Standard
2-3/8" (20-)
BACKSET
2X .250 ± .016 THRU
.900 ± .016
38" FROM
FINISHED FLOOR
SUGGESTED HEIGHT
1.250 MIN
6" MIN
3" MIN
OUTSIDE
OF DOOR
SUITABLE REINFORCEMENT IN
AREA SHOWN TO PREVENT
BOWING OF DOOR SURFACES
CL OF
BEVEL
2
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
A8046:B 9-01-10
Notes: For use with
RDLU93 & RDLU94
functions only.