SARGENT SSL1 Security SideLite Spring Latch - Manual

• Mark and Drill Holes • Final Door Prep • Frame Prep for Strike
A7963B
FOR ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com
Door Preparation
Hollow Metal Doors should be properly reinforced for lock support. If support is not provided, contact door manufacturer.
For all metal door preparations, use Template No. 4623
For all wood door preparations, use Template at bottom of page 2
INSTALLATION INSTRUCTIONS FOR
SECURITY SIDELITE LATCH
Tools
#2 Phillips Head Screwdriver
Center Punch
1" Bore
1/2" Drill Bit
1. Latch Assembly
2. Face Plate
3. Tailpiece
4. Thumbturn Assembly
5. Combo Screws (6)
6. Strike
15/16"
2-3/4"
1" Hole
1/2" Hole
(Not a thru hole)
1"
2-1/4" x 3/16"
depth
Copyright © 2008, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.