SARGENT 5800 & 12-5800 Alarmed Exit Hardware User Manual

Optional mortise nuts with through-bolts

Advertising
background image

A7421B

A7421B

A

B

1. Assemble arm to closer with index mark on end of spindle 45° from axis of arm as illustrated below. Use washer and screw

to attach arm.

RIGHT HAND

ILLUSTRATED

C

Left hand door

Position of arm when

assembling to spindle

45

°

Closer spindle,
washer and screw.

Right hand door

45

°

Index mark
on spindle

Main
arm

Main
arm

Index mark
on spindle

Closer spindle,
washer and screw

.

With provided fasteners, secure closer body to door
with power adjustment away from hinge.

1431 (OD, ODB, HD, HDB ) DOUBLE EGRESS
PULL SIDE TRACK INSTALLATION INSTRUCTIONS

CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY
MAY RESULT IN INJURY OR DAMAGE
For assistance, contact SARGENT at 800-727-5477 or www.sargentlock.com
NOTE: AN AUXILIARY DOOR STOP IS REQUIRED

OR

Pre-drill - 3/32” holes for

self tapping screws or #16 drill for

#12-24 tap for machine screws

Drill and tap door and frame.
See page 4 for dimensions.

Optional mortise nuts
with through-bolts

Frame

Unreinforced door

Door stop

Mortise nut

Drill 3/8" dia.
Hole for mortise nut body.

Drill 1/4" dia. hole
for mounting screws

Copyright © 2006, 2008, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.

Copyright

©

2006, 2008, Sargen

t Manufacturing Company

, an A

SS

A

ABL

O

Y

Group company

. All right

s reser

ved. Reproduction in whole or in par

t without the

express writ

ten permission of Sargen

t Manufacturing Company is prohibited.

Advertising