SARGENT 281 Series Cast Iron Closer - Manual

281 DOOR CLOSERS WITH O10, H10 & SSO ARMS
INSTALLATION INSTRUCTIONS
281 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE.
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477.
DRILL AND TAP DOOR
AND FRAME FOR #12-
24 MACHINE SCREWS.
RIGHT HAND SHOWN,
LEFT HAND OPPOSITE.
*NOTE: FOR MAXIMUM
POWER, INSTALL FOR
110° OPENING
PULL SIDE PULL SIDE
PUSH SIDE PUSH SIDE
LEFT HAND DOOR RIGHT HAND DOOR
CLOSERS ARE NON-HANDED
ATTACH ARM TO FACE OF FRAME.
B
RIGHT HAND SHOWN
FOR H10 ARM ONLY
C
INSTALL MOUNTING BRACKET WITH ARROW POINTING UP FOR BOTH RH & LH DOORS. MOUNT CLOSER WITH SPRING
ADJUSTING SCREW AWAY FROM HINGE. SEE PAGE 2 FOR THRU BOLT INFO.
1
ALTERNATE: PREASSEMBLE ARM PRIOR TO
ATTACHING TO STOP.
C1
A
Copyright © 2012, 2014, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without
the express written permission of Sargent Manufacturing Company is prohibited.
A7921C