SARGENT 1540 Series Standard Duty Overhead Surface Mount User Manual

SARGENT Safety

Advertising
background image

1546, 1547, 1548, 1549 SERIES

SURFACE OVERHEAD HOLDERS & STOPS

INSTALLATION INSTRUCTIONS

3

4

1

4

Use the attached template that corresponds with the type of hinge being used
• Drill door for channel and drill and tap metal frame for #12-24

machine screws to attach jamb bracket

Friction adjustment on models
1546F, 1547F, 1548F and 1549F only

To increase friction, insert flat bladed screw driver as shown

and turn clockwise for desired friction

LEFT HAND SHOWN

1

• Secure channel to door (spring end towards hinge) with machine screws and

mortise nuts provided

• For models 1547, 1548 and 1549 only, install bracket on channel as shown
Secure jamb bracket to frame with fasteners provided

2

Holding tension adjustment on hold open models only
(1546H, 1547H, 1548H and 1549H)

To increase tension insert a 9/32"

allen wrench and turn clockwise as required

JAMB BRACKET

BRACKET

SPRING

END

A7501B TEMPLATE 7488D

NON-HANDED. LEFT HAND SHOWN, RIGHT HAND OPPOSITE.

FOR INSTALLATION ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com

A7501B

Copyright © SARGENT Manufacturing. All rights reserved.
Reproduction in whole or in part without the express written
permission of SARGENT Manufacturing is prohibited.

Advertising