SARGENT LR8600 Low Profile Center & Top Latch Concealed Vertical Rod Exit Devices - Manual (Page 6)

6
Copyright © 2009, 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
A7393D 3-10-10
REQUIRED SCREWS
(2) #8-32
Under-cut flat head
(Lock fronts)
(2) #6-32
Under-cut flat head
(Chassis to rail)
(2) Cup washer
(Trim mounting)
(2) #10-24
Pan head
(Mounting bracket to door)
(2) #12-24
Under-cut flat head
(Mortise lock to door)
(2) #10-24
Under-cut oval
(Top case to door)
(4) #8-32
#8 Under-cut oval
(Covers)
(4) #10-24
Under-cut flat head
(2 Chassis to door)
(2 Strike to frame)
(2) #8-32
Truss head
(Link connector to
mortise tail)
(2) 1/4-20
Flat head
(Trim mounting)
SCREW PACKS AND MISCELLANEOUS PARTS
68-1317 Front cover (Finished)
68-1316 End cap (Finished)
01-0696 Spiral pin
68-1186 Primary outside front
68-1183 Secondary outside front
77-0883 Curved lip strike (Left hand)
77-0884 Curved lip strike (Right hand)
650 Top strike pack
77-4236 Screw pack (Mortise lock)
68-4373 Screw pack (Chassis)
68-3677 Screw pack (Top case)
68-4383 Screw pack (Mounting plate)
651 Kit Lexan touch pad
816 Cylinder dogging kit
FOR ADDITIONAL INFORMATION CONTACT SARGENT AT 1.800.727.5477