SARGENT 7800 Knob Locks - Manual (Page 2)

IMPORTANT: two-
to
Check Polarity:
Verify + (red) wire
Fail Secure
Fail Safe
LX
DX
Fail Secure
Fail Safe
LX / DX Actuator Actuator only
*Patent Pending
Installation Notes
1. Install mortise lock and electric hinge. With new applications, a raceway harness with 8 & 4-pin connectors will be
pre-installed inside the door by ASSA ABLOY door manufacturer when specified during ordering process. Raceway harness
kits are also available for retrofit applications.
2. If door does not have a raceway harness with connectors, either consult factory for raceway retrofit kit or cut the connectors
off product and hardwire, as required.
3. Wiring to pigtail harness is per facility wiring requirement. Follow individual instructions below.
® ElectroLynx Connector System Notes
The system is designed to be installation friendly with connectors from the electric hinge through the door to the lock. The only
wiring is to the harness which plugs into the electric hinge.
IMPORTANT:
The plug and receptacle connectors are designed to mate and lock together as shown in the illustration. Plug the connectors
into each other with the locking mechanism aligned as indicated.
Do NOT force connectors on any other way.
™ Look for the LYNX
8-Pin Connector
® ElectroLynx
As part of their promise to provide innovative, fast and
effective, and higher security solutions to their customers,
ASSA ABLOY Group companies offer ElectroLynx, a
universal quick-connect system that simplifies the
electrification of the door opening.
® ElectroLynx is a registered trademark of ASSA ABLOY, Inc.
Locking mechanism
Plug
Receptacle
2
A7722D Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
ASSA ABLOY, the global leader
in door opening solutions