SARGENT 8200 Lever Lock - Manual

INSTALLATION INSTRUCTIONS FOR
8200 Lever with Freewheeling Escutcheon Trim FE
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477 or www.sargentlock.com
Parts List Description
1. Inside Lever
2. Spring
3. Set screw
4. Through-bolt Screws (2)
(1/4" - 20 x 1-3/4)
5. Inside Escutcheon Plate
6. Screws & Lockwashers (2)
(#8-32 x 5/8")
7. Adapter & Plate Assy.
8. Lever spindle
9. Outside Escutcheon
Assembly
10. Cylinder
11. Screws (2) (#8-32 x 1/4")
12. Front Plate
13. Lockbody screws (2)
(#12 x 1-1/4")
14. Lockbody
25 Function Shown — For hole locations of other functions, see template page 4
U.S. Patent Nos. 5,678,870,
5,992,195 and 6,178,794
A7334F
1
Insert lockbody into mortise
cutout. Hold loosely in place
with (2) lockbody screws.
Do not tighten screws fully
at this time.
A. With outside lever
horizontal, carefully insert
the mounting posts through
the door and lockbody.
Make sure the spindle is
properly engaged in the
lock. Outside escutcheon
assembly should be flush
with door surface.
If cylinder is not included in
this function, proceed to step 3.
B. Screw cylinder into
lockbody until flush with
escutcheon face.
Install Lockbody Outside Escutcheon Assembly
3
1
2
5
4
11
12
10
14
6
7 8
Inside
of
Door
Outside
of
Door
13
9
1 2
Copyright© 2005, 2008, 2010, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
Lockbody
Screws