SARGENT R8200 with Simpli Roseless Trim - Manual

R8200 Mortise Lock with Simplí Roseless Trim
with One-Sided Trim Only
INSTALLATION INSTRUCTIONS
For assistance, contact SARGENT at 800-727-5477 or www.sargentlock.com
Step 3
Press lock centering
spring onto the lockbody
as shown Step 1
Slide plate & post assembly
through lockbody on the side
opposite from the trim
Step 5
Position spindle, slide
adapter plate over the
spindle and secure
with (2) screws
Step 2
Secure plate & post assembly
to the lockbody with (2)
lockwashers
Step 4
Install lockbody
into the door
Step 6
Attach collar to
adapter by rotating
clockwise using lever
base tool, supplied.
Tighten until collar is
flush with door.
Step 7
Slide lever over spindle
and adapter and secure
with set screw
Threaded hole to attached
lever must be facing towards
the hinge
A8031:A 4-7-10
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
Lever base tool (provided)