SARGENT 7900 Mortise Lock - Manual (Page 4)

4
93
Dummy trim
94
Dummy trim
95
Single trim
dummy lock
65/F22
Privacy bedroom
or bath lock
66/F19
Privacy bedroom
or bath lock
70/71
Electrical
70: Fail safe
71: Fail secure
72/73
Electrical
72: Fail safe
73: Fail secure
45/F12
Dormitory or
exit lock
50/51F15
Hotel guest
lock/Store room
deadbolt lock
55/F04
Office or
entry lock
37/F05
Classroom lock
38/F32
Classroom
security intruder
latchbolt lock
24/F21
Room door
lock
25/F13
Dormitory or
exit lock
26/F14
Store door lock
04/F07
Storeroom
closet lock
15/F01
Passage or closet
latch
16/F09
Apartment or exit
or public toilet
lock
43/F20
Apartment
corridor door lock
SARGENT 7900 Mortise Lock Function List
Note: Shaded Levers are rigid at all times
How To Change Hand of Lock
INSIDE
INSIDE
OUTSIDE
OUTSIDE
LEFT HAND
LEFT HAND
REVERSE
BEVEL
RIGHT HAND
RIGHT HAND
REVERSE
BEVEL
DOOR HANDS DETERMINED FROM OUTSIDE (KEYED/LOCKED)
DOOR HANDING
To Change Hand of Locking Piece
1. Position lockbody with red surface of locking
piece visible
2. Insert blade type screwdriver into lockingvpiece slot
to rotate locking piece
3. Push locking piece toward back of lockbody and
rotate 180°, until RED surface shows on opposite side
4. RED indicates locked (outside) side
To Reverse the Bevel of Latchbolt & Deadlatch
1. Remove outside front
2. Rotate latchbolt 180º
3. Replace outside front, which prevents the latch
from rotating
4. Flip deadlatch by hand to match bevel of latchbolt
Locking guide slot/
red locking piece
Lockbody
Inside front
Outside front
A7859:C 7-16-10
Copyright © 2006-2010, Sargent Manufacturing Company,
an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express
written permission of Sargent Manufacturing Company
is prohibited.
7900 lockbody
(right hand shown)