SARGENT 7000 Series Vertical Rod Lock - Manual (Page 5)

PAGE 5
7860D
4/13
Copyright ©2007, 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Chassis mounting screw
metal door application
(#10-24 x 3/4" Phillips flat
head mach. screws, 4 pcs)
ET Mounting Screw (1/4"-20 x 3"
Phillips oval head mach. screws 2 pcs)
Top case mounting screw
(#10-24 x 3/8" Phillips oval
head machine screw 2 pcs)
GG HH
ET
2) Screw top bolt & rod assembly (A) into inner chassis (B).
3) Slide complete assembly into top of door.
4) Attach inner chassis (B) to door with (2) screws (GG).
5) Through bolt inside and outside ET Lever trims using ET mounting screws.
Spindle cams must be UNDER inner chassis platform (C).
6) USE INSIDE TRIM to adjust TOP BOLT AND ROD assembly (A).
For 1/8" GAP OR LESS between top
of door and door frame, rotate bolt even
with top of door.
For 1/8" GAP OR GREATER between
top of door and door frame, rotate bolt
to gap minus 1/8" above door.
Top bolt & rod assembly A
Outside ET Lever Trim
Inner Chassis B
GG Screws (2)
ET Mounting Screws (2)
Inside ET Lever Trim
Platform C