Wheatheart X Series 13 Augers - Manual (Page 78)

4. T RANSPORT W HEATHEART - X13 S ERIES A UGERS
4.1. T RANSPORT P ROCEDURE X1374, X1384, X1394
78 30787 R1
Figure 4.1 Retract Wheel Axles
3. Position and secure hitch pin and safety chain (See Figure 4.2). Place safety
chain through clevis welded to auger hitch tube and bolt together before
attaching to tractor.
Note: The chain must have a load rating at least as high as the auger weight.
Figure 4.2 Position and Secure Hitch Pin and Safety Chain
4. Raise intake feed hopper into transport position and secure with saddle pin
and hairpin.
Note: Do not operate auger with intake hopper in transport position. This will damage
the u-joint.
5. Place swivel jack (on side of hitch) in transport position and lock.
AXLE
AXLE PIN
JACK LUG